Ductile Iron Fittings
Complete range of ductile iron fittings and special developments
Complete range of ductile iron fittings and special developments. Different joining systems are available: Plug with TYTON® gasket, flanges and restrained joint.
Characteristics and Joining Systems
Characteristics
- Available for drinking water (EN 545 / ISO 2531) and wastewater (EN 598)
- Full range between DN80 and DN2600
- K12 / K14 wall thickness
- Pressure rate: Consult depending on the type of joint, up to RWP of 100bar depending on joining system.
- Lining and coatings: Internal cement and external bitumen. Internal and external epoxy with a minimum thickness of 250µ according to EN 14901. Consult for other coatings.
Joining Systems
- TYTON® gasket fittings: DN80 to DN2600
- Flanged Fittings: DN80 to DN2000
- Lok & Play® double chamber restrained fittings DC LOK: from DN80 to DN1600
TYTON® Gasket Fittings / Flanged Fittings
The tightness of the TYTON® gasket is generated by means of deformation caused by the water pressure. The TYTON® gasket, generally in EPDM or NBR, is located inside the socket of the element where the spigot of the adjacent element is inserted. It is in between the socket and the spigot. The back side of the TYTON® gasket is the softer side. Tightness is based on the principle of “the greater the pressure, the greater the sealing”.
The flange gasket generates watertightness by deformation of a flat gasket located between the flat surfaces of two flanges that is tightened by screws.
| TYTON Socket Joint | Flanged Joint |
|---|---|
| RWP 40 up to DN600 | PN10/16/25/40 up to DN600 |
| RWP 25 up to DN2600 | PN10/16/25 up to DN2000 |
| Description | Code | Icon | Downloading link |
|---|---|---|---|
| Double Socket 11.25º Bend | MMK11 |  | Download |
| Double Socket 22.50° Bend | MMK22 | | Download |
| Double Socket 30º Bend | MMK30 | | |
| Double Socket 45º Bend | MMK45 |  | Download |
| Double Socket 90º Bend | MMQ |  | Download |
| Single Socket 11.25° Bend | MK11 |  | |
| Single Socket 22.50º Bend | MK22 |  | Download |
| Single Socket 30º Bend | MK30 |  | |
| Single Socket 45º Bend | MK45 |  | |
| Sleeve | U |  | |
| All Socket Tee | MMB |  | |
| Double Socket with 45º branch | MMC |  | |
| Double Socket Taper | MMR |  | |
| Spigot Plug | O |  | |
| Socket Cap | P |  | |
| Screwed Ring for P Part | P |  | |
| Screwed Cap for Screwed Socket | PX |  | |
| Home supply connection with 2" internal screwed outlet | HAS |  | |
| ENQ Part | ENQ |  | |
| 90º Bend with skid for snow cannon | ENH |  | |
| Smoothed end Pipe Section | GL |  | |
| Flanged Socket | EU |  | Download |
| Socket and Flanged 90º Bend with skid | EN |  | |
| Double Socket Tee with Flanged Branch | MMA |  | |
| Double Flanged 11.25º Bend | FFK1 |  | |
| Double Flanged 22.50º Bend | FFK22 |  | |
| Double Flanged 30º Bend | FFK30 |  | |
| Double Flanged 45º Bend | FFK45 |  | Download |
| Double Flanged 90º Bend | Q |  | Download |
| Flanged Smooth Pipe | F |  | |
| Triple Flanged Tee | T |  | Download |
| Flanged Cross | TT |  | |
| Flanged Concentric Reducer | FFR |  | Download |
| Flanged Eccentric Reducer | FFRe |  | |
| Double Flanged 90° Bend with Skid | N |  | |
| Blind Flanges | X |  |
Lok&Play Locked Fittings
The socket has two chambers, the first one lodges the Tyton® gasket, which makes the joint watertight. The second chamber has a window (or several, depending on the diameter) over which the locking segments are inserted once the end of the tube is plugged in; these provide a positive axial seal between the inside surface of the socket and the locking cord at the smooth end of the pipe.
| Pressure | High Pressure |
|---|---|
| RWP 40 bar from DN80 to DN300 | RWP 100 bar from DN80 to DN300 |
| RWP 30 bar from DN350 to DN600 | RWP 64 bar DN400 |
| RWP 25 bar from DN700 to DN1000 | RWP 50 bar DN500 |
| RWP 40 bar DN600 |
Available Stock Range
